* speci cations subject to change without notice. dimensions are in mm0.25 unless stated otherwise. idea, inc., 1351 titan way, brea, ca 92821 ph:714-525-3302, 800-led-idea; fax: 714-525-3304 catalog 995a a-36 t-1-3/4, pcb indicator assembly g66s and G67S series the g66s and G67S series of pcb indicators are designed for direct viewing. specify part desired as follows: g66s/ or G67S/order code. please note the g66s series is not available with a built in resistor. order code and information (all ratings at 25 c ambient) led lamp typical characteristics recom. op. if (ma) epoxy & type color order code peak vf (v) iv (mcd) 2 1/2 (nm) @if=20ma @if=10ma (deg) tinted diffused resistor required red h 697 2.1 2.0 36 5-10 hi eff red i 635 2.0 9.0 36 10-20 green g 565 2.1 9.0 36 10-20 yellow y 585 2.0 7.0 36 10-20 tinted transparent high brightness hi eff red it 635 2.0 30 16 10-20 green gt 565 2.1 30 16 10-20 yellow yt 585 2.0 28 16 10-20 tinted diffused for 2ma operation red h2 697 2.0 1.6 @ 2ma 36 2-10 hi eff red i2 635 2.1 2.0 @ 2ma 36 2-10 green g2 565 2.0 2.0 @ 2ma 36 2-10 yellow y2 585 2.0 2.0 @ 2ma 36 2-10 tinted diffused 5v operation hi eff red i5 635 - 4.5 36 5 v green g5 565 - 4.5 36 5 v yellow y5 585 - 4.5 36 5 v tinted diffused 12v operation hi eff red ib 635 - 4.5 36 12 v green gb 565 - 4.5 36 12 v yellow yb 585 - 4.5 36 12 v white diffused bipolar, bicolor hi eff red/grn eg 635/565 2.1/2.0 2.5/2.5 54 10-20 yellow/green yg 585/565 2.1/2.0 2.5/2.5 54 10-20 red/green sg 660/570 1.8/2.2 6.0/2.5 - 10-20 G67S 5.0.5 4.8 6.2 3.5 min + g66s 6.2 3.5.5 4.7 + 3.5 min 6.1 6.1 + 3.2 2.54 2.54 + rear view recommended hole pattern
|